Drawer common method of failure and exclusion

2010-6-14 23:24:01

1, insert the key when the flexible pull without flexibility. This causes deformation caused mostly off-chip, off chip deformation caused by excessive axial clearance center padlocks, pull the padlocks when the round marbles and billiards Kong Fasheng dislocation, inserting Shiyou reset, so mating is not flexible. Exclusion method is to remove the padlocks, adjust the marketing piece or add pad to eliminate gaps.

2, drawer open 10 open and flexible, open the drawer into the resistance increases after. This is caused by the failure to install, install the latch groove drawer on the beam shaping too far, the Haidian District, scraping latch bolt padlocks slot side, that opens the resistance increases. As long as the amendments to the drawer on the excess part of the beam can latch slot.

3, the key to long-term use after the plug is not flexible. As the same as the key to the padpadlocks hole plus pencil graphite powder () or paraffin.

Come from: http://www.metalpadlock.com